The Division of Labor in Ancient Japanese Print Production

Print Friendly and PDF

The Great Wave off Kanagawa
by Japanese artist Hokusai c. 1830.
(Public domain, via Wikimedia
Commons, PD-1923.)
Long before Henry
Ford instituted the principle of the division of labor on the automobile
assembly
line, the ancient
Japanese had long practiced specialization of tasks in the mass production of
their ukiyo-e prints. Their division of labor included four different people:
the publisher, the printer, the artist and the woodblock carver. Each of these
people played distinct roles in the production of the print.
The Publisher.

The publisher got the ball rolling. After coming up with the basic
idea for a print that he speculated would sell, the publisher commissioned the
artist to design the print.  He also
either directly employed the woodblock carvers and printers that made the
prints, or he contracted to have the work done.

While production of the prints was to some degree a collaborative venture,
the publisher was the driving force in the project and ultimately had last say
in production. Since he put his money at risk, he was the ultimate decision
maker regarding print production. This was especially true in making decisions
that affected manufacturing costs and ultimately his bottom line.   
The Artist.

The design of the print resulted as a collaboration between the
publisher and artist. After making preliminary sketches and subsequent
corrections, a final detailed sketch was completed on a very thin paper. In
many cases, the finished drawing by the artist’s assistant.
The Woodblock Carver.

The sketch was then turned over to the woodblock carver, who glued
it to the wood, which had been prepared for carving. Since the woodblock is
carved as a negative image of the print, the side of the paper which was drawn
would be positioned against the wood.
After the print was glued to the wood, the paper was often oiled making
it more transparent so the lines were more visible.  This woodblock, called the key block, was carved
so that everything other than the lines was removed. At the base of the block
kento registration guides were also carved, which allowed for correct alignment
of printed colors. After carving the key block, additional blocks, one for each
color, were also carved.
The Printer.

After the blocks were cut, the job was turned over to the printer.
Just as Western artists had apprentices, so did the Japanese printers. These apprentices
were charged with the responsibility of grinding the pigments and mixing the
ink.
Unlike the woodcut printers in Europe, who used oil based inks,
Japanese printers used water based inks. These inks are applied to the woodblocks
using horsehair brushes instead of brayers (inking rollers). After inking, the
paper is aligned on top of the woodblock. Using a tool called a baren, the back
of the paper is burnished and the completed paper print removed from the
woodblock.



Video about the Ukiyoe tradition


Using a tool called a baren, the back of the paper is burnished
to transfer the image of the inked woodblock. 

By the end of the 19th century, offset printing had replaced
hand production of Japanese prints. Fine art prints, though, are still done by many
artists the old fashioned way. Today’s artists, however, usually perform all of
the activities in creating a work of art, from concept to design to print
production.  
RELATED ARTICLES
What is Relief Printing?
What are Ukiyo-e Prints?
How Japanese Printmaking Influenced Western Art
The Evolution of Color in Japanese Woodblock Printing

The Division of Labor in Ancient Japanese Print Production

Checklist for Relief Printing with Oil Based Ink
Japanese Carving Tools for Woodblock Relief Printing
Japanese Carving Knives for Woodblock Printing
Safely Carving Woodblocks, Woodcuts and Linocuts
Linocut Tips
Japanese Papers for Printmaking
How Japanese Mulberry Paper is Made
How Handmade Papers in the West are Made
Selecting a Brayer for Relief Printing
Selecting Wood for Relief Printing
Selecting an Ink for Relief Printing
Inking the Woodblock Panel
Clean Up After Relief Printing







About Jim Hingst: After fourteen years as Business Development Manager at RTape, Jim Hingst retired. He was involved in many facets of the company’s business, including marketing, sales, product development and technical service.

Hingst began his career 42 years ago in the graphic arts field creating and producing advertising and promotional materials for a large test equipment manufacturer.  Working for offset printers, large format screen printers, vinyl film manufacturers, and application tape companies, his experience included estimating, production planning, purchasing and production art, as well as sales and marketing. In his capacity as a salesman, Hingst was recognized with numerous sales achievement awards.

Drawing on his experience in production and as graphics installation subcontractor, Hingst provided the industry with practical advice, publishing more than 150 articles for  publications, such as  Signs Canada, SignCraft,  Signs of the Times, Screen Printing, Sign and Digital Graphics and  Sign Builder Illustrated. He also posted more than 400 stories on his blog (hingstssignpost.blogspot.com). In 2007 Hingst’s book, Vinyl Sign Techniques, was published.  Vinyl Sign Techniques is available at sign supply distributors and at Amazon. 

Slides of Jim’s Artwork

© 2017 Jim Hingst


Leave a Reply